Articles in Press

Articles in press are peer reviewed, accepted papers to be published in the journal Tribology and Materials. These papers are still not assigned to volumes and/or issues of the Journal but can be cited using the year of online publication and the DOI. They will be removed from the articles in press page once they are published as part of a Journal volume and/or issue.

Wear of copper-based hybrid composites reinforced with graphite and recycled porcelain particles

Hashim Shukur Hammood, Saif Sabah Irhayyim, Omar Jamal Abdulkareem

Tribology and Materials, Vol. x, No. x, 202x, pp. xx-xx; https://doi.org/10.46793/tribomat.2026.016

Optimisation of base oil production from sunflower oil and trimethylolpropane via response surface methodology

Nurazira Mohd Nor, Muhammad Muizzuddin Khairuddin, Asiah Abdullah, Sheikh Ahmad Izaddin Sheikh Mohd Ghazali, Is Fatimah, Nur Sulihatimarsyila Abd Wafti

Tribology and Materials, Vol. x, No. x, 202x, pp. xx-xx; https://doi.org/10.46793/tribomat.202x.0xx

Correlation of microstructure and mechanical properties of the aluminium alloy 6061 reinforced with seashell particles

Riki Hendra Purba, Septia Saharani, James Julian, Fathin Muhammad Mahdhudhu, Fitri Wahyuni, Elvi Armadani

Tribology and Materials, Vol. x, No. x, 202x, pp. xx-xx; https://doi.org/10.46793/tribomat.202x.0xx

Optimisation of punch speed to improve cut surface quality of straight-plate implants produced by progressive punching

Yani Kurniawan, Wina Libyawati, Hendri Sukma

Tribology and Materials, Vol. x, No. x, 202x, pp. xx-xx; https://doi.org/10.46793/tribomat.202x.0xx

Morphological and structural properties of CuO thin films prepared by the sol-gel method

Zerina Sakić, Almedina Modrić-Šahbazović, Sanjin Gutić, Maja Đekić

Tribology and Materials, Vol. x, No. x, 202x, pp. xx-xx; https://doi.org/10.46793/tribomat.202x.0xx

Turning process of aluminium alloy 7075 under minimum quantity lubrication using vetiver oil and waste cooking oil

Karthikraja Maruthamuthu, Kalidoss Pandi, Anbu Sathasivam

Tribology and Materials, Vol. x, No. x, 202x, pp. xx-xx; https://doi.org/10.46793/tribomat.202x.0xx

Main Menu

Articles in Press

Wear of copper-based hybrid composites reinforced with graphite and recycled porcelain particles

Hashim Shukur Hammood, Saif Sabah Irhayyim, Omar Jamal Abdulkareem

Tribology and Materials, Vol. x, No. x, 202x, pp. xx-xx; https://doi.org/10.46793/tribomat.2026.016

Optimisation of base oil production from sunflower oil and trimethylolpropane via response surface methodology

Nurazira Mohd Nor, Muhammad Muizzuddin Khairuddin, Asiah Abdullah, Sheikh Ahmad Izaddin Sheikh Mohd Ghazali, Is Fatimah, Nur Sulihatimarsyila Abd Wafti

Tribology and Materials, Vol. x, No. x, 202x, pp. xx-xx; https://doi.org/10.46793/tribomat.202x.0xx

Correlation of microstructure and mechanical properties of the aluminium alloy 6061 reinforced with seashell particles

Riki Hendra Purba, Septia Saharani, James Julian, Fathin Muhammad Mahdhudhu, Fitri Wahyuni, Elvi Armadani

Tribology and Materials, Vol. x, No. x, 202x, pp. xx-xx; https://doi.org/10.46793/tribomat.202x.0xx

Optimisation of punch speed to improve cut surface quality of straight-plate implants produced by progressive punching

Yani Kurniawan, Wina Libyawati, Hendri Sukma

Tribology and Materials, Vol. x, No. x, 202x, pp. xx-xx; https://doi.org/10.46793/tribomat.202x.0xx

Morphological and structural properties of CuO thin films prepared by the sol-gel method

Zerina Sakić, Almedina Modrić-Šahbazović, Sanjin Gutić, Maja Đekić

Tribology and Materials, Vol. x, No. x, 202x, pp. xx-xx; https://doi.org/10.46793/tribomat.202x.0xx

Turning process of aluminium alloy 7075 under minimum quantity lubrication using vetiver oil and waste cooking oil

Karthikraja Maruthamuthu, Kalidoss Pandi, Anbu Sathasivam

Tribology and Materials, Vol. x, No. x, 202x, pp. xx-xx; https://doi.org/10.46793/tribomat.202x.0xx